RECON Internal

Internal vulnerability scanning

One Scout probe inside your network finds every device, reads what is installed, assesses Active Directory and re-tests each finding before it reaches your report. From EUR 16.80 per asset per year.

  • Linux probe, one-line install
  • Outbound HTTPS only
  • Each asset billed once a year
recon.orizon.one

How RECON Internal works

One probe, one scan, a verified result.

  1. Install Scout

    Run one command on a Linux host (x86_64 or arm64). The probe installs as a systemd service and connects out to RECON over HTTPS.

  2. Discover and verify

    It maps the subnets you choose, identifies every host and checks it for vulnerabilities, then re-tests each finding on your network before it is reported.

  3. Act

    Fix in order with per-host grades, Active Directory attack paths, the changes between scans and reports for your team and your board.

The Scout probe: one Linux host, outbound only

Scout is a single Linux binary. It registers with RECON on its first heartbeat, picks up scans over HTTPS and uploads the results. Nothing on the internet connects to it, so there is no inbound port to open.

  • Linux on x86_64 or arm64, installed with one command as a systemd service
  • The install token expires after 24 hours, and the probe key can be rotated in one click
  • One probe per network segment; probe groups run one scan across several probes, sites and companies
  • Updates from the probe card when a new version is published
recon.orizon.one

Every device, including the ones that run the plant

Scout identifies each host by the protocols it speaks, from office laptops and file servers to PLCs, imaging systems and EV chargers.

  • IT networks

    Every live address on the subnets you choose, with names, vendors and neighbours.

    • ARP
    • ICMP
    • IPv6 NDP
    • mDNS
    • LLMNR
    • NetBIOS
    • DHCP
    • LLDP
    • SNMP
    • DNS
    • WS-Discovery
  • Industrial OT and ICS

    PLCs, RTUs and controllers identified by their own protocol, with vendor, model and firmware.

    • Modbus/TCP
    • Siemens S7
    • PROFINET
    • EtherNet/IP
    • BACnet/IP
    • DNP3
    • IEC 60870-5-104
    • IEC 61850 MMS
    • OPC UA
    • CODESYS
  • Healthcare

    Imaging modalities, PACS and interface engines, found with a non-clinical request.

    • DICOM
    • HL7 MLLP
  • IoT and infrastructure

    Cameras, printers, server management controllers, EV chargers and solar inverters.

    • ONVIF
    • IPP
    • IPMI
    • Redfish
    • OCPP
    • SunSpec

Gentle on production networks

Industrial and medical systems are asked to identify themselves with the request each standard defines, such as Modbus Read Device Identification or BACnet Who-Is. The probe reads; it does not write to a controller or change its state.

Subnets behind a firewall are scanned at a paced rate, live hosts first, and the scan stops if the firewall starts blocking instead of pushing on.

  • You choose the subnets, and when they are scanned
  • Each asset gets a stable identity across rescans, from SMB and SSH host keys
  • Honeypots and decoys are flagged, and a confirmed decoy is not billed as an asset
recon.orizon.one

Every host, down to the installed package

Each asset gets its operating system, hardware, role, applications and vulnerabilities, and a posture score from 0 to 100 with its letter grade. Its Software tab lists what runs on it and where each item comes from.

  • Windows: installed software read over Remote Registry by a read-only collector account, after a one-time setup of a security group and a Group Policy
  • Linux: installed packages read over SSH, with a key or a password
  • Without credentials, firmware and OS versions still come from SNMP, LLDP and service banners
  • Exact package builds decide distro-patched CVEs, host by host
  • 32 vulnerability check modules, from SMB, RDP and LDAP to databases, containers and industrial controllers, plus CVE correlation
recon.orizon.one

Proven, not presumed

After the analysis, the probe re-checks every finding inside your network. Each one ends as Proven, To verify or Closed, the same model as RECON External.

  • Proven

    Confirmed on the target from the scan’s own isolated server, with the evidence of every check attached.

  • To verify

    The test could not decide either way. It stays open and is flagged for a person to check by hand.

  • Closed

    A false positive the test disproved, or a finding excluded from the count. It no longer weighs on the Risk Score.

What a verified internal finding can carry

Exploit-verified
A live protocol check confirmed the vulnerability is present on at least one affected host, not only that the version falls in a vulnerable range. The host list shows which hosts were checked.
Actively validated
The probe confirmed the finding with a real handshake, authentication or payload, not just a banner read.
Vendor-confirmed
The exact installed package build is older than the build the vendor fixed. When a Linux distribution may have backported the fix without changing the version, RECON says "Backport possible" instead.

Active Directory security assessment

Read-only LDAP collection scores your directory out of 100 with a grade from A to F, and ranks the routes from a low-privilege account to Tier-0.

recon.orizon.one

What it checks

  • Kerberoasting and AS-REP roasting
  • krbtgt password age
  • Unconstrained, constrained and resource-based delegation
  • DCSync rights and dangerous ACLs
  • Stale users, computers and privileged accounts
  • AD CS certificate templates and CAs, ESC1 to ESC16
  • LAPS coverage on workstations
  • GPO abuse, local admin by GPO and GPP passwords
  • LDAP signing and channel binding
  • Dangerous domain trusts

Certificate (ESC) and DCSync findings come from directory and template state. RECON detects the misconfiguration; it never runs the exploit.

Enter a domain administrator once: the probe uses it to create a dedicated read-only account, one security group and one Group Policy for the read-only software inventory, then discards the administrator password. These are changes to Active Directory, and so is removing them later. Several domains can be connected to one probe.

Attack paths to Tier-0

Each path from an ordinary account to Domain Admin is ranked by confidence and effort. The chokepoint shows the single object whose fix breaks the most paths, so the first change is the one that counts.

  • Confidence and effort come from the number of hops and of permission edges on the path
  • A path is critical when it passes through DCSync rights
  • The overview counts how many findings sit on a live path

The same Meccanica Adda demo directory: the service account svc_erp sits on three of its five ranked paths, so it is the first fix.

recon.orizon.one

Inside and outside, on one page

RECON ties what is reachable from the internet to the internal host behind it, and shows which hosts connect out.

  • Exposure proven by an active knock from outside, read from an edge device’s port-forward rules, or matched by fingerprint
  • Each exposed port points to the internal host and service it reaches
  • Hosts that connect out to the internet are marked separately from hosts reachable from it
  • When exposure cannot be determined, RECON says so instead of calling the host safe
recon.orizon.one

One Risk Score, a grade per host, and what changed

The Risk Score sums up the network in one number from 0 to 10. Every host gets a posture score from 0 to 100, and every scan is compared with the previous one.

recon.orizon.one
recon.orizon.one

NIS2 Article 21, measured on your network

Each internal scan evaluates 25 technical controls from probe evidence and marks each one Pass, Warn, Fail or Not assessed, with the affected assets.

recon.orizon.one

RECON provides technical evidence for your NIS2 program. It is not a certification.

NIS2 compliance with Orizon

Reports for the team and the board

One click produces the full technical report and the executive brief. Both are digitally signed, can be shared through a link that expires, and come in English, Italian or Spanish.

  • HTML technical report with the network map, every asset and vulnerability, and Active Directory in its own section
  • Executive brief with the decisions, the main business risks, a 7/30/90-day plan with the Risk Score after each phase, and NIS2
  • PDF with a verified summary page and a full Active Directory section
  • CSV export and a REST API for your own tools
recon.orizon.one

Priced per asset, per year

Each asset is charged at most once a year, and duplicates that merge are refunded automatically. Larger plans lower the price per asset.

  • Starter

    EUR 16.80/asset
    • 1 asset
    • EUR 16.80/asset
    • Full asset discovery
  • Most Popular

    Professional

    EUR 1,400
    17% off
    • 100 assets
    • EUR 14/asset
    • Valid 12 months
  • Business

    EUR 5,600
    33% off
    • 500 assets
    • EUR 11.20/asset
    • Valid 12 months
  • Enterprise

    EUR 9,800
    42% off
    • 1,000 assets
    • EUR 9.80/asset
    • Valid 12 months

Questions about RECON Internal

The probe, the network, Active Directory, NIS2 and pricing.

It is the regular inspection of the devices inside your network, such as servers, workstations, network gear and industrial systems, for missing patches, weak configurations and exposed services an attacker could use once inside. RECON Internal does it from a probe in your network and re-tests each finding before reporting it.
You install the Scout probe on a Linux host in the network you want to cover. It discovers live hosts on the subnets you choose, identifies each one, reads installed software where it has credentials, runs vulnerability checks, correlates CVEs and then verifies the findings. Results appear in RECON with a network map, per-host grades and the changes since the last scan.
No. The probe only makes outbound HTTPS connections to RECON: it sends a heartbeat, picks up scans and uploads results. You do not open or forward any port from the internet to it. It needs to reach the subnets it scans, and RECON over HTTPS.
Industrial and medical systems are queried with the identification requests each standard defines, such as Modbus Read Device Identification, BACnet Who-Is, OPC UA GetEndpoints and a DICOM association request. The probe reads; it does not write to a controller or change its state. Routed subnets behind a firewall are scanned at a paced rate, and the scan stops if the firewall starts blocking. You choose which subnets are scanned and when.
None for discovery and vulnerability checks. For Active Directory and the Windows software inventory, you enter a domain administrator once: the probe uses it to create a dedicated read-only account, one security group and one Group Policy that lets only that group read installed software over Remote Registry, then discards the administrator password. These are changes to Active Directory, and so is removing them later. On Linux, the probe reads packages over SSH with a key or a password. Credentials are encrypted at rest.
It collects the directory over read-only LDAP and checks Kerberos (Kerberoasting, AS-REP roasting, krbtgt password age), delegation, ACLs and DCSync rights, Tier-0 groups, account hygiene such as stale and privileged accounts, domain policy, trusts and AD CS certificate templates from ESC1 to ESC16. It scores the directory out of 100 with a grade from A to F and ranks the attack paths to Tier-0. It detects these conditions; it never runs the exploits.
No. A penetration test is a point-in-time attempt to break in and prove impact. RECON Internal runs on a schedule, inventories every host and verifies each finding with safe checks, so you also see what changed between scans. Fireline, Orizon’s autonomous penetration test, covers the external perimeter today, so inside the network RECON Internal is the scheduled check.
Each internal scan evaluates 25 technical controls related to NIS2 Article 21, such as network segmentation, SMB signing, end-of-life systems, centralised logging, MFA indicators and backup detection, and marks each one Pass, Warn, Fail or Not assessed, with the affected assets. The executive brief adds a NIS2 section. RECON provides technical evidence; it is not a certification.
Per asset, per year. Starter is EUR 16.80 per asset. Professional covers 100 assets for EUR 1,400, Business 500 assets for EUR 5,600 and Enterprise 1,000 assets for EUR 9,800. Each asset is charged at most once a year.
A Linux host with systemd on x86_64 or arm64, physical or virtual, that can reach the subnets to scan. One command installs Scout as a service. Use one probe per network segment, and group probes to scan several sites or companies at once.

See your network as an attacker inside it would

Book a demo to see the probe, the Active Directory assessment and the reports, and to plan the deployment on your network.